Cda HCG 731 Instrukcja Użytkownika Pobierz pdf (Strona 15)

Fastening the Installation Brackets

Each cooktop is provided with an installation kit including brackets and screws for fastening the top to

ﬁxture panels from 2 to 4 cm thick.

– Turn the cooktop upside down and fasten the brackets “F" and "R” to the appropriate socket holes,

without tightening the screws “B” for the moment.

– Make sure that the brackets are fastened as shown in ﬁgures 16a, 16b and 16c.

Fastening the Cooktop

– Insert the cooktop into the hole and position it correctly.

– Adjust the position of the brackets “F" and "R” and tighten screws “B” to block the cooktop ﬁrmly in

position.

– With a sharp cutter or trimmer knife trim the excess sealing material around the edge of the cooktop.

Take care not to damage the workbench.

Fig. 16a

20 mm min.

40 mm max.

20 mm min.

40 mm max.

Front sideRear side

Fig. 16cFig. 16b

Front side

Rear side

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Brak uwag

Cda HCG 731 Instrukcja Użytkownika Strona 15