CDA RC9300 Instrukcje Operacyjne Pobierz pdf (Strona 41)

Fig. 48

230 V

PEN

(L2)

Fig. 49

Electrical feeder cable connection

The operations must be executed by a qualified technician.

To connect the supply cable:

- Remove the screws securing the cover “A” on the rear of the cooker (fig. 48).

- Feed the supply cable through the cable clamp “D”. The supply cable must be of

a suitable size for the current requirements of the appliance; see the section “Feeder

cable section”.

- Connect the wires to the terminal block “B” as shown in the diagram in figure 49;

or connect the phase wires to the terminal block “B” and the earth wire to the

terminal PE as shown in figure 48.

- Take up any slack in the cable and secure with the cable clamp “D”.

- Replace the cover “A”.

Before effecting any intervention on the electrical parts of the appliance, the

connection to the network must be interrupted.

Feeder cable section type H05RRF

230 V 3 x 0,75 mm

Earth cable must be 2 cm longer than neutral and live cables.

1 2 ... 36 37 38 39 40 41 42 43 44

Brak uwag

CDA RC9300 Instrukcje Operacyjne Strona 41