CDA 11Z6 for Dokumentacja Pobierz pdf (Strona 33)

Replacing the Halogen Oven Lights

WARNING: Ensure the appliance is switched off before replacing the

lamp to avoid the possibility of electric shock.

– Let the oven cavity and the heating elements to cool down;

– Switch off the electrical supply;

Top Right Lamp:

– Remove the protective cover C (ﬁg. 11);

– Replace the halogen lamp B with a new one suitable for high temperatures

having the following speciﬁcations: 230V and same power (check watt

power as stamped in the lamp itself) of the replaced lamp.

IMPORTANT WARNING: Never replace the bulb with bare hands;

contamination from your ﬁngers can cause premature failure.

Always use a clean cloth or gloves.

– Reﬁt the protective cover;

Left Lamp:

– Remove the left wire rack by unscrewing the ﬁxing screws.

– Press down from the top the protective cover A (ﬁg. 11) and remove it by

rotating on the lower side. IMPORTANT: never use screwdrivers or other

utensils to remove the cover A. This could damage the enamel of the oven

or the lampholder. Operate only by hands.

– Replace the halogen lamp B with a new one suitable for high temperatures

having the following speciﬁcations: 230V and same power (check watt

power as stamped in the lamp itself) of the replaced lamp.

IMPORTANT WARNING: Never replace the bulb with bare hands;

contamination from your ﬁngers can cause premature failure.

Always use a clean cloth or gloves.

– Reﬁt the protective cover A operating in reverse order.

ATTENTION: the notch in the inner edge of the cover must be oriented

toward the lamp.

– Assemble the left wire rack.

Note: Oven bulb replacement is not covered by your guarantee.

Fig. 11

WRONG

CORRECT

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

Brak uwag

CDA 11Z6 for Dokumentacja Strona 33