CDA FW250 Instrukcja Użytkownika Pobierz pdf (Strona 36)

Components

OutBack PV Ground-Fault Detection and Interruption System

Ground fault detection and interruption is required by US National Electric Code for PV

arrays mounted on or within a specied vicinity of residential dwelling roofs as a safety

precaution. The OutBack PV Ground-Fault Detection and Interruption System protects

wiring and system components for one, two or four PV arrays when used in a GSLC, FLEXware 250, FLEXware 500 or FLEXware 1000.

Model Description Terminals Width

PNL-GFDI-80

PV Ground-Fault Detector Interrupter 1/4” stud 1.515” (38.5 mm)

80 amp 150VDC single pole panel mount

PNL-GFDI-80D

PV Ground-Fault Detector Interrupter 1/4” stud 2.265” (57.3 mm)

80 amp 150VDC two pole panel mount

PNL-GFDI-80Q

PV Ground-Fault Detector Interrupter 1/4” stud 2.775” (95.9mm)

80 amp 150VDC four pole panel mount

Uses two, three or ve 3/4” wide panel mount breaker spaces

FW-X240 Auto-transformer

Designed to be housed within the FLEXware 500 or FLEXware 1000 AC enclosures. The FW-X240 Auto-transformer with a

120 volt/30 amp primary and secondary winding can be used for step-up, step-down, generator and split-phase output

balancing for series stacked inverters. It can transfer 2kW from one 120 VAC leg of a generator or the total rating of an

OutBack stacked series/parallel 120/240 VAC inverter/charger conguration.

Model Description Includes

FW-X240

Auto-transformer 4 kVA 120/240VAC 60Hz with 25 amp dual pole

Auto-transformer , 25 amp dual pole

breaker for mounting inside of FLEXware 500-AC or FLEXware 1000-AC breaker and mounting hardware

DC Bus Bars

OutBack DC bus bars are designed to enable the

most complex of code compliant DC cable connections.

Model Description Includes

FW-BBUS Breaker Bus allows connection of two 175-250 amp, three 100-125 Plated copper plate rated

amp, four 1-80 amp DC breakers or three 500 amp DC current shunts for 500 amps and two 5/16

inch bolts for mounting

FW-CBUS-8 Combiner Bus connects up to eight DIN mounted breakers or six Two 2/0 AWG box lug

DIN mounted fuse holders terminals - plated copper

plate rated for 200 amps

FW-CBUS-12 Combiner Bus connects up to twelve DIN mounted breakers or eight Two 2/0 AWG box lug

DIN mounted fuse holders terminals - plated copper

plate rated for 200 amps

FW-SBUS Shunt Bus allows up to four high current cable connections on Two 3/8 inch bolts solid

same side of DC shunt

brass rated for 1000 amps

DC Current Shunts

When used with an amp hour meter, OutBack Power Technologies DC current shunt kits can provide

valuable insight into the status of your batteries or DC power source. One shunt kit is included

standard on FLEXware 500 and FLEXware 1000 DC enclosures.

Model Description Includes

FW-SHUNT250 500 amp DC current shunt with Shunt, mounting hardware and

terminal bus bar for mounting on top of a terminal bus bar for connection to

FX Series Inverter/Charger FX Inverter’s DC negative terminal

FW-SHUNT500 500 amp DC current shunt with Shunt, terminal bus bar and one white

terminal bus bar insulator and mounting screws

FW-BBUS FW-SBUS

FW-CBUS-12

FW-CBUS-8

FW-SHUNT500

FW1000 BUS

1 2 ... 31 32 33 34 35 36 37 38 39 40

Komentarze do niniejszej Instrukcji

Brak uwag

CDA FW250 Instrukcja Użytkownika Strona 36

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie CDA FW250